Elcometer 138
Bresle Salt KitChecks soluble salt contamination on a prepared surface using a Bresle patch and portable meter. The meter converts conductivity readings into surface salt density, helping inspectors assess cleanliness before coating.
← Industrial Automation
Authorised partner · Elcometer
Measure with confidence. Protect what matters.
Inspection instruments for major coating and finishing projects, from surface preparation and application conditions to final quality checks.
01 / PREPARE
02 / APPLY
03 / VERIFY
02 / APPLY
03 / VERIFY
Inspection across the coating lifecycle
The right measurement at the right stage.
Explore a selection of Elcometer instruments relevant to industrial coating inspection. Each product below links to Elcometer's own technical page for model options and specifications. Tell Kubrii your substrate, coating and inspection requirements when requesting a quote.
01
Inspection stage
Surface preparation
Confirm the condition of the substrate before the coating is applied.
Elcometer 224
Digital Surface Profile GaugeMeasures peak-to-valley surface profile on flat or curved surfaces after abrasive blasting. Use the reading to check whether the prepared surface offers the profile required by the coating specification.
02
Inspection stage
Application conditions
Check the environment before and during painting.
Elcometer 319
Dewpoint MeterRecords climatic conditions relevant to painting, including air and surface temperature, humidity and dew point. Helps teams decide whether site conditions are suitable for coating work and document them for inspection records.
03
Inspection stage
Coating thickness
Verify that the applied protective layer meets the project requirement.
Elcometer 456
Coating Thickness GaugeMeasures dry film thickness of coatings on metal substrates. Integral and separate-probe versions support different access and surface conditions; available functions vary by gauge model and probe.
Elcometer 500
Coating Thickness GaugeUses ultrasonic measurement to check coating thickness on concrete and similar cementitious substrates without cutting into the coating. Useful when inspecting protective systems on structures beyond steel.
04
Inspection stage
Adhesion & coating integrity
Assess bond strength and locate discontinuities in finished coatings.
Elcometer 510
Automatic Pull-Off Adhesion GaugeApplies controlled pull-off force to a bonded dolly to measure the adhesion of a coating to its substrate or between layers. Automated force application helps make repeatable site and laboratory tests.
Elcometer 270
Pinhole DetectorUses the wet-sponge method to find pinholes and other discontinuities in nonconductive coatings over conductive substrates. A practical low-voltage choice for appropriate thin coating systems.
Elcometer 266
Holiday DetectorUses high-voltage testing to locate coating flaws or porosity in protective coatings, including pipeline applications. Selection of voltage and accessories depends on the coating system and inspection standard.
Work with Kubrii
Specify the instrument your project needs.
Share your location, application, substrate, coating system and relevant standard. We can discuss suitable models, probes, accessories and a quotation.
Request a quotation ↗This is a selection from the Elcometer range. Kubrii model, accessory and country availability is subject to confirmation; the official Elcometer pages contain current technical details. Sending an enquiry opens your email application.